| |
|
|
|
|
|
10,000 Clean Booth Configuration
1.Product material: the clean booth adopts stainless steel sealing plate, high-efficiency air supply filter unit FFU at the top, to ensure the use of purification level, static 10000
2.Fan unit: It adopts a special fan for high-efficiency air-supply filter unit, which has small vibration, stable operation, low noise and no maintenance;
3.Air filter device: Equipped with aluminum frame without separator high efficiency filter, the filtration efficiency is: H13 (MPPS), ensure the use level of purification (US federal standards)
4.Control system: gear speed;
5.Auxiliary configuration: with adjustable feet, light and easy to move the displacement, positioning and placement of a solid security, with high-quality fluorescent lamps, with pressure difference table;
6.Parameter standard: FFU noise level ≤55Db, average surface wind speed 0.26~0.6m/s, power supply 220V/50hz | |
|
Clean Booth Standard
1. The maximum permissible particle concentration of 0.5 micron in 100 clean booth is less than 3520 (pc/m3), and the maximum allowable particle concentration of 5 micron is less than 293 (pc/m3), that means dust particle of 0.5 micron in 100 clean booth is less than 100 Thousands, of dust particle 5 micron in 100 clean booth is less than 10,000 (it is not allowed)
2. The maximum permissible particle concentration of 0.5 micron in thousand clean booth is less than 35200 (pc/m3), and the maximum allowable particle concentration of 5 micron is less than 2930 (pc/m3), that means dust particle of 0.5 micron in 100 clean booth is less than 9 million, of dust particle 5 micron in 100 clean booth is less than 50,000.
3. The maximum permissible particle concentration of 0.5 micron in thousand clean booth is less than 352000 (pc/m3), and the maximum allowable particle concentration of 5 micron is less than 29300 (pc/m3), that means dust particle of 0.5 micron in 100 clean booth is less than 90 million, of dust particle 5 micron in 100 clean booth is less than 600 thousand. | |
|
|
Clean Booth Advantage
Remove dust particles floating in the air.
Temperature and humidity control
Adjust pressure
Adjust air tightness between structures and compartments Prevent static electricity
Prevent electromagnetic interference | |
|
Military Optical Bonding
Optical bonding techniques provide an upgraded solution for the enhancement of LCD displays. The bonding process can dramatically improve the readability of displays under outdoor environments. Compared to the traditional high brightness solution, optical bonding doesn`t change the original design of displays, only applying an optical process on the surface of the screen. It saves energy by requiring lower power supply as well as protects viewer`s eyes.
While providing exceptional optical performance, it also increases the ruggedness of displays and enhances their mechanical properties with improved shock resistance and heat dissipation. Bonding technology, well suited for both glass and plastic, can be combined with shielding and heating functions, which offers comprehensive solutions to meet requirements under adverse ambient conditions.
Features:
Improving the sunlight readability of displays
Physical optical enhancement, zero energy consumption
High impact and vibration resistance, good heat dissipation
Functionally compatible with shielding and heater
Reversible process, maximum protection of LCDS
Optimizing the displays` optical and mechanical performance | |
|
|
|
We sent out this message to all existing Company Name customers.
If you want more information about our privacy policy, please visit this page. | | |
| |
